Recommended Mixers
Multi-announcer Setup
- This setup is recommended if you have more than one announcer, or plan to have more in the future.
- You can either connect this mixer to the Pixellot computer via the USB cable (below) or using the XLR to 1/8" cable at the bottom of this article.
** This product has a power supply that requires being connected to a power source when in use.
|
Behringer Xenyx X1204USB (~$215) |
16' USB cable (~$9) |
|
|
|
Single-announcer Setup
- This setup is recommended if you have just one announcer at a time.
- You can either connect this mixer to the Pixellot computer via the USB cable (below) or using the RCA to 1/8" cable at the bottom of this article.
** This product requires a USB connection for power. However, you can use the USB cable (listed) for power and audio connections if you plug the mixer into the Pixellot Computer directly – no need to use a separate audio cable.
|
Behringer Xenyx 302USB (~$70) |
16' USB cable (~$9) |
1/8" to 1/4" adapter (~$7) **required if you intend to use a headset with a 1/4" listening cable (like the Audio Technica BHPS-1) |
|
|
|
|
Recommended Headsets
Higher-end setup:
|
Audio Technica BPHS-1 (~$200) |
Headphone Splitter (~$12) |
|
|
|
**You'll need one headset per person, and one headphone splitter for each 2 people.
Low-cost setup:
|
Koss SB40 (~$30) |
XLR Adapter for Koss (~$10) |
Headphone Splitter (~$7) |
|
|
|
|
**You'll need one headset and one XLR adapter per person, and one headphone splitter for each 2 people.
Other
If your school has an existing audio setup, you might have a cable already.
|
|
|
|